How To Root Huawei Mate 30 Pro 5G And Install TWRP Recovery?

Root Huawei Mate 30 Pro 5G And Install TWRP Recovery

Hey, there today in this article I will show you How To Root Huawei Mate 30 Pro 5G and Install TWRP Recovery On Huawei Mate 30 Pro 5G. This is a complete guide for rooting this device. We will be using Magisk to Root Huawei Mate 30 Pro 5G, as Magisk works on all the latest devices. So, the success rate is very high.

With the of this article, you will be able to Unlock Bootloader On Huawei Mate 30 Pro 5G; now this step is very important, and without this, you will be not able to Root your device. I have shown you the easiest method to root this device, and anyone can Root Huawei Mate 30 Pro 5G with the help of this guide.

But before going to the steps, I want to give a small description about Huawei Mate 30 Pro 5G

Specification Of Huawei Mate 30 Pro 5G

Huawei Mate 30 Pro 5G is a newly launched device by Huawei; this device has a similar specification what we get in Huawei Mate 30. There is a change in processor, and other specs are the same. Now Huawei has planned to give Huawei Mate 30 Pro 5G and Huawei Mae 30 to Android Q (10) which is a good thing.

As you know that Android Q development is in the initial phase, and soon the official Android 10 will be announced by the developers.

  • This phone comes with a 6.53 Inches Full HD+ 1176 x 2400 pixels OLED Display which is protected by Corning Gorilla Glass 6
  • Huawei Mate 30 Pro is powered by the HiSilicon Kirin 990 which is an Octa-Core CPU
  • It has 8 GB of RAM and 256 GB of Internal Storage
  • Moving to the OS this device runs on EMUI 10 on top of Android 10
  • Camera – It has a Quad Rear-Facing Camera of 40 MP + 8 MP + 40 MP + 3D TOF camera and the Front-Facing camera is a dual 13 MP + 3D TOF camera
  • Moving to the battery it has a Non-removable Li-Po 4500 mAh battery which supports Fast battery charging at 40W and Fast wireless charging 27W + Power bank/Reverse wireless charging
  • Sensors: It has the following Face ID, fingerprint (under display, optical), accelerometer, gyro, proximity, barometer, compass sensors.

Pre-Requirements

  1. Make Sure To Setup ADB And Fastboot On Windows (Important Step)
  2. Charge Your Phone To 100% Or Minimum 75%
  3. Take Complete Backup Of Your Android
  4. This Guide Is Only Huawei Do Not Try This Method On Other Devices
Warning!
MyPhoneUpdate Is Not Liable For Any Loss Or Damage To Your Smartphone. The Methods Shown In This Site Are Not Tested For Every smartphone. So, Try It With Your Own Risk.

Purchase Unlock Code For Huawei Mate 30 Pro 5G

As you might know that Huawei has stopped providing unlock code. So, you won’t be able to unlock the bootloader of any Huawei smartphones for now. But there are third-party services available from which you can buy unlock codes to unlock your phone bootloader.

If you are a Huawei user then you might know that Huawei provides unlock code for free but now you have to pay to get unlock code. Below I have mentioned the sites from which you can buy unlock code to unlock the bootloader of Huawei Mate 30 Pro 5G.

Note
MyPhoneUpdate Is Not Liable For Any Loss Or Damage To Your Smartphone. The Methods Shown In This Site Are Not Tested For Every Smartphones. So, Try It With Your Own Risk.

Step 1. Unlock Bootloader On Huawei Mate 30 Pro 5G

1.) First Off We Need To Enable Developer Options For That Go To Settings >> About Phone >> Now Tap On Build Number 6-7 Times

  • Now Go Back >> Go To Advanced Settings >> Developer Options
  • Enable OEM Unlock Option
Note
Note: Try This Method With Your Own Risk MyPhoneUpdate Is Not Responsible For Any Damage To Your Phone

2.) Now Setup ADB And Fastboot On Windows (Important Step)

3.) Once Done Go To Platform Tools Folder >> Type “cmd” In The Address Bar & Press Enter To Open Command Prompt

4.) Boot Your Phone Into Fastboot Mode

  • Power Off Your Phone >> Now Press & Hold Volume Up + Power Button Together Till You See Boot Logo

5.) Once Done Now Connect Your Huawei Mate 30 Pro 5G To PC/ Laptop Using USB Cable.

6.) Now On-Command Window Type The Following Command

adb reboot bootloader
  • Hit Enter, Now To Unlock Bootloader Type The Following Command
fastboot oem unlock .......

(Replace ……. With Unlock Code) You, Will, Get Your Unlock Code On Your Mail. Hit Enter

7.) That’s It 🙂 You Have Successfully Unlocked The Bootloader Of Huawei Mate 30 Pro 5G.

Now you can Flash SuperSu, Custom ROM, TWRP Recovery, & Custom Kernel

Step 2. Install TWRP Recovery On Huawei Mate 30 Pro 5G

Make Sure To First Unlock Bootloader On Huawei Mate 30 Pro 5G Before Proceeding To Install Custom Recovery On Your Phone!

1.) First off Enable USB Debugging On Huawei Mate 30 Pro 5G

  • Go To Settings >> System >> About Phone >> Tap On Build Number 6-7 Times
  • Now Go Back >> Advanced Settings >> Developer Options >> Enable “USB Debugging”

2.) Now You Have To Setup ADB And Fastboot On Windows PC This Is Very Important Step

3.) After That Download TWRP Recovery File On Your PC And Renamed The Downloaded Recovery File Name To twrp.img.

4.) Once The Files Are Downloaded Go-To Platform Tools Folder >> Type “cmd” In The Address Bar & Press Enter To Open Command Prompt

5.) Connect Your Phone To PC/Laptop >> And Type The Following Command

adb devices

Once you write this command, you must see your device (Random String). If not, then you have not installed the drivers properly. So, install it properly and try again.

7.) Next Type The Following Command To Boot Your Phone Into Fastboot Mode

fastboot reboot bootloader

6.) Now Type The Following Command To Install TWRP Recovery

fastboot flash twrp.img

The flashing process with a start so, wait till the flashing process completes

7.) Now type the following command to Reboot Your Phone

fastboot reboot

8.) That’s It 🙂 You Have Successfully Install TWRP Recovery On Your Huawei Mate 30 Pro 5G

Step 3. Root Huawei Mate 30 Pro 5G With Magisk Root

  • First You Need To Download Magisk.zip File On Huawei Mate 30 Pro 5G
  • Now Boot Your Phone To Recovery Mode By Pressing Volume Down + Power Button At Same Time Until You See The Boot Animation.
  • After That Tap On Install >> Then Locate The Magisk.zip File And Select It >> And Then Tap On Swipe To Confirm Flash

  • Once The Flashing Process Is Done. Tap On Reboot
  • That’s It 🙂 You Have Successfully Rooted You’re Huawei Mate 30 Pro 5G

Now If you want to Unroot Huawei Mate 30 Pro 5G Then Follow this guide on How To Unroot Huawei Mate 30 Pro 5G


Final Words: So, this is all about How To Unlock Bootloader, Root Huawei Mate 30 Pro 5G And Install TWRP Recovery. I have shown you the easiest method to Unlock Bootloader, Root Huawei Mate 30 Pro 5G And Install TWRP. I hope this method worked on your phone. If you want to ask any questions related to this post, then make sure to comment down below. We would love to hear from you.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.